Aim from inside the car
Hear something on the left? Turn the beam left — from your seat. No getting out, no walking around the vehicle at night.
The Sardstar MTY-01 is a remote-controlled pan tilt spotlight mount — a spotlight gimbal that holds your spotlight on the roof or hood and aims it for you. Sit inside, pick up the remote, and sweep the beam exactly where you need it.
Get a quote — reply within 48 hours · Ask for price, shipping & lead time on WhatsApp
No climbing out in the dark, no fixed beam pointing the wrong way. You stay in the cab and move the light.
Hear something on the left? Turn the beam left — from your seat. No getting out, no walking around the vehicle at night.
Four magnetic discs per gimbal grip a steel roof or hood — no drilling, no permanent bracket. Each disc has a rubber protective layer. Magnetic mount works on steel surfaces only — not suitable for aluminum, plastic, or carbon fiber body panels. The gimbal needs a 12–24V power connection.
270° horizontal rotation and 65–155° pitch. Sweep a hillside, lift the beam up a slope, or drop it down to the work area.
433MHz remote with ≥100 m range. Control one gimbal — or two gimbals from a single remote with the 1-to-2 setup.
A compact remote in your hand, a solid magnetic base on the vehicle. That’s the whole system.
Square, flat and easy to hold with one hand. Paddle control on the left for direction, five buttons on the right for light and sweep modes.
This is the gimbal on its own — bracket on top for your spotlight, control box in the middle, magnetic base below. The gimbal is supplied on its own by default; a matching spotlight is available at extra cost — ask us on WhatsApp for a quote. The gimbal and the lamp ship in separate packages.
MTY-01 with a spotlight mounted (spotlight available separately — ask us on WhatsApp).
Any job where the light needs to go somewhere your headlights don’t point.
Headlights point down on a steep climb. Tilt the MTY-01 up and light the track ahead — and sweep side to side to pick your line. It's a remote spotlight for UTV and truck alike.
Stick it on the open hood and aim the beam straight into the engine bay or work area. Hands free, light exactly where your hands are.
Noise in the yard at night? Sweep the beam across the fence line from inside the truck without stepping out into the dark.
Park, stick it on the steel roof, and swing the light around camp while you pitch, cook and load — powered from your vehicle’s 12–24V supply.
Straight from the manual. If you need anything else — wiring, lamp fit, shipping — ask us on WhatsApp.
The standard setup for one vehicle and one spotlight position. Includes 4 magnetic discs.
Chat on WhatsApp — 1-to-1Two gimbals, one remote. Cover two positions or two vehicles with a single controller. Includes 8 magnetic discs (4 per gimbal).
Chat on WhatsApp — 1-to-2Everything you need to mount and run the gimbal. A matching spotlight is available separately at extra cost — ask us on WhatsApp for a quote; the gimbal and the lamp ship in separate packages.
Quick answers — for price and shipping to your country, message us on WhatsApp.
By default, no — the MTY-01 is the remote-controlled gimbal only, and you can mount your own 12V spotlight on the bracket (it supports a 12V lamp up to 300W and under 1.5 kg). A matching spotlight is also available from us at extra cost — ask us on WhatsApp for a quote. The gimbal and the lamp ship in separate packages.
No. The base uses 4 magnetic discs per gimbal and sticks to a steel roof or hood. Magnetic mount works on steel surfaces only — not suitable for aluminum, plastic, or carbon fiber body panels. The gimbal needs a 12–24V power connection.
Mount it on a clean, flat steel surface and make sure all magnetic discs are fully seated. Check the mount before each trip. If you plan to use it at highway speeds, please contact us on WhatsApp first.
The magnetic discs have a rubber protective layer that guards the paint surface. To keep it that way, wipe the discs and the mounting surface clean before fitting, and when removing the gimbal, lift the discs straight off instead of sliding them across the panel.
1-to-1 is 1 remote + 1 gimbal, with 4 magnetic discs. 1-to-2 is 1 remote + 2 gimbals, with 8 magnetic discs (4 per gimbal), so one remote controls two gimbals. Both use the same box size — tell us which you need on WhatsApp.
It runs on 12–24V, so it suits most cars, trucks, UTVs and work vehicles. It is rated IP65 for rain and dust.
Tap any “Chat on WhatsApp” button on this page. Tell us your country and whether you want 1-to-1 or 1-to-2, and we’ll reply with the price, shipping and next steps.
Tell us your country and 1-to-1 or 1-to-2 — we’ll send price, shipping and details right back on WhatsApp. Prefer email? Write to renbw627@gmail.com.